How do I Connect my MACARD Wifi Extender To Synology Nas

Well, it is very important for your NAS to have good internet speeds. Now many users have router at one corner and NAS in the other corner of the house. This way connecting the NAS with ethernet cable to the router isn’t possible.


So people install, wifi extenders to solve this problem. And then they connect an ethernet from their extender to the synology NAS. Although it is not a perfect setup. Being a network engineer I would rather recommend you to go for “Mesh Wifi System” or “Access Point”. Powerline will also be a good option here.


Anyways if you want to learn how to connect any wifi extender to synology nas, then let me guide you here.


Setup Synology NAS with Wifi Extender


Specifically, in this video we will talk about MACARD wifi extender setup with NAS. So, first and foremost we will simply need to setup Macard Wifi Extender. Once you do that, then make sure you have long enough ethernet cable to connect your NAS and Extender.


Plus they both should be plugged in the same room. Now connect an ethernet cable from between your macard wifi repeater and NAS. Next, plug the wifi repeater into an electrical outlet.


Plug the Synology NAS into an electrical socket next. As both the device will be power on. You will be able to setup your NAS via web management page or synology assistant. Type find.synology.com or download it synology assistant to start the NAS setup.


So, open a browser on the computer that is connected to the same wifi. And in the url or address bar type find.synology.com. This will take you to your NAS setup page.


Follow the on screen instructions to complete the setup. In the end you will be able to install the DSM on your computer. Plus you will be able to create storage pool, create shared folder, etc.





As a NAS engineer I would recommend you to always backup your NAS. You can do that via number of method. You can go for Hyperback, Cloud Sync, or USB copy option if you are not much tech savvy.


Nas not connecting to the wifi extender?


Just in case your macard wifi extender is not connecting to the nas then we recommend you to reset it. You can do that by putting a paper clip inside the reset hole of the extender for 10 seconds. Release the pin after 10 seconds. 

Now the extender goes back to its factory default settings. So, next setup the wifi repeater again and then try connecting your NAS with the wifi extender.


The best extender that we recommend for this purpose will ne netgear eax80. Its range is around 2500 sq ft. Plus it has 4 ethernet ports which can be used to connect multiple devices at the same time.


Still the best option will be either install a mesh system, access point or a bridge. It will ensure better connectivity and security of the NAS.


How to Secure NAS?


In order to secure your NAS from ransomware and hackers you will simply need to install 2 factor authentication as first line of defence. You will be able to do that through the DSM. 


There are two types of attacks like direct attack and indirect attack. In direct attack they will try to find vulnerability in your network. Like any open in your router, etc. 


Second most common method to infect a nas is by getting control of any computer that is connected to the same network as NAS. 


So, these are our few recommendations related to wifi range extender and synology NAS.


Read More: https://medium.com/@wifilinksetup/how-can-i-connect-my-new-wifi-booster-to-ps5-d34fba36cbd1

Comments